New York
Auto Added by WPeMatico
3D-printed glasses startup Fitz is making custom protective eyewear for healthcare workers
A lot of startups have answered the call for more personal protective equipment (PPE) and other essentials to support healthcare workers in their efforts to curb the spread and impact of COVID-19. One of those is direct-to-consumer 3D-printed eyewear brand Fitz, which is employing its custom-fit glasses technology to build protective, prescription specs for front-line healthcare workers in need of the best protection they can get.
Fitz Protect is a version of Fitz’s eyewear that uses the same custom measurement tool Fitz created for use via its iOS app, made possible by Apple’s depth-sensing Face ID camera on newer iPhones and all iPad Pro models. The app allows virtual try-on, and provides millimeter-level accurate measurements for a custom fit. Protect is a version of the glasses that still supports a wide range of prescriptions, but that also extends further like safety glasses to provide more coverage and guard against errant entry of any fluids through the eyes.
Healthcare professionals are doing what they can to ensure their face, mouth, nose and eyes are protected from any coughs, sneezes or other droplet-spreading activity from COVID-19 patients that could pass on the infection. These measures have more broadly focused on face shields that feature a single transparent plastic sheet, and N95 masks (and alternatives when not available) to protect the mouth and nose.
Fitz CEO Gabriel Schlumberger explained via email that the design for Fitz Protect came from working front-line doctors and nurses from New York, LA and Texas who were all looking for something to source prescription protective eyewear.
“More than 60% of doctors are glasses wearers, and current guidance is for them to stop wearing contact lenses,” Schlumberger explained, adding that Fitz Protect is also designed to be worn in conjunction with a face shield, when that’s an available option, to provide yet another layer of defense.
“We heard from prescription glasses wearers that their standard glasses didn’t provide anywhere near adequate coverage, especially over the eyebrows, and in some cases they were adding cardboard cut-outs,” he said. “We leveraged our existing system to create something much better. ”
Fitz’s model also helps on the pricing side because it’s already designed to be an aggressively cost-competitive offering when compared to traditional prescription eyewear. Their glasses typically retail for just $95 including frames, lenses and shipping, and are also offered in a $185 per year unlimited frame membership plan. For doctors, nurses and hospital staff, the entire cost of Fitz Protect is being waived, and the company is seeking donations to help offset its own manufacturing costs, which currently stand at around $100 per set, though process improvements should bring that down, according to Schlumberger, as they expand availability.
Already, he said that nearly 3,000 healthcare professionals have signed up to receive a pair in their first week of availability, so they’re working on adding scale to keep up with the unexpected demand.
Powered by WPeMatico
Impossible Foods rolls out to nearly 1,000 new grocery stores and supermarkets
Starting tomorrow, 777 supermarkets in California, Illinois, Indiana, Iowa and Nevada will begin stocking the Impossible Foods plant-based meat substitute.
Fueling the increased distribution and a push to expand its product suite and geographic footprint domestically and internationally is a $500 million round of funding the company closed in March.
Some of that money is supporting the company’s debut at stores like Albertsons, Jewel-Osco, Pavilions, Safeway and Vons.
In all, the company said it would be in nearly 1,000 grocery stores by tomorrow. That includes all Albertsons, Vons, Pavilions and Gelson’s Markets in Southern California; all Safeway stores in Northern California and Nevada; Jewel-Osco stores in Chicago, eastern Iowa and northwest Indiana; Wegmans stores on the East Coast and Fairway markets in and around New York.
Since its debut in September, the company said it was the number one item sold at the locations it was available on the East and West coasts.
The company’s 12-ounce packages are sold for somewhere between $8.99 and $9.99 and it plans to soon introduce the Impossible Burger at even more stores nationwide.
“We’ve always planned on a dramatic surge in retail for 2020 — but with more and more Americans’ eating at home, we’ve received requests from retailers and consumers alike,” said Impossible Foods’ president Dennis Woodside, in a statement. “Our existing retail partners have achieved record sales of Impossible Burger in recent weeks, and we are moving as quickly as possible to expand with retailers nationwide.”
Even as the company announced its expansion, it made moves to assuage any consumer concerns over the processes in place at its manufacturing facilities.
Impossible Foods said it had instituted mandatory work from home policies for all of its employees who can telecommute; restricted visitors to its facilities and those operated by co-manufacturers; banned all work-related travel; and implemented new sanitizing and disinfection procedures at its workplaces.
“Our No. 1 priority is the safety of our employees, customers and consumers,” Woodside said. “And we recognize our responsibility for the welfare of our community, including the entire San Francisco Bay Area, our global supplier and customer network, millions of customers, and billions of people who are relying on food manufacturers to produce supplies in times of need.”
The company said it was proceeding with its research and development initiatives; accelerating the ramp of its production facilities; and moving to broadly commercialize its Impossible Sausage and Impossible Pork products.
Impossible Foods has raised $1.3 billion from investors, including Mirae Asset Global Investments, Khosla Ventures, Horizons Ventures and Temasek.
Powered by WPeMatico
Frame AI raises $6.3M Series A to help understand customers across channels
Frame AI, a New York City startup that uses artificial intelligence and machine learning to help companies understand their customers better across multiple channels, announced a $6.3 million Series A investment today.
G20 Ventures and Greycroft led the round together. Bill Wiberg, co-founder and partner at G20, will join Frame’s board under the terms of the deal. The total raised with an earlier seed round is over $10 million, according to the company.
“Frame is basically an early warning system and continuous monitoring tool for your customer voice,” Frame CEO and co-founder George Davis told TechCrunch . What that means, in practice, is the tool plugs into help desk software, call center tooling, CRM systems and anywhere else in a company that communicates with a customer.
“We then use natural language understanding to pull out emerging themes and basically aggregate them to account and segment levels so that customer experience leaders can prioritize taking actions to improve their relationships,” Davis explained.
He believes that customer experience leaders are being asked to do more and more in terms of talking to customers on ever more channels and digesting that into useful information for the rest of their company to be responsive to customer needs, and he says that there isn’t a lot of tooling to help with this particular part of the customer experience problem.
“We don’t think they have the right tools to do either the listening in the first place or the analysis. We’re trying to make it possible for them to hear their customers everywhere they’re already talking to them, and then act on that information,” he said.
He says they work alongside customer data platforms (CDPs) like Segment, Salesforce Customer 360 and Adobe Real-time CDP. “We can take the customer voice information from all of these unstructured sources, all these natural language sources and turn it into moments that can be contributed back to one of these structured data platforms.”
Davis certainly recognizes that his company is getting this money in the middle of a health and economic crisis, and he hopes that a tool like his that can help take the pulse of the customer across multiple channels can help companies succeed at a time when a data-driven approach to customer experience is more important than ever.
He says that by continuing to hire through this and building his company, he can contribute to restarting the economic engine, even if in some small way.
“It’s a bleak time, but I have a lot of confidence in New York and in the country, in the customer experience community and in the world’s ability to bounce back strong from this. I think it’s actually created a lot of solidarity that we’re all going to find a lot of new opportunities, and we’re going to just keep building Frame as fast as we can.”
Powered by WPeMatico
Frank raises $5M more in its quest to get students max financial aid
Frank, a New York-based student-facing startup, has raised $5 million in what the company described as an “interim strategic round” that Chegg, a public edtech company, took part in. According to Frank founder and CEO Charlie Javice, previous investors Aleph and Marc Rowan took part in the round alongside new investor GingerBread Capital.
The education funding-focused startup last raised known capital in December of 2017, when it closed a $10 million Series A. Frank raised a seed round earlier that same year worth $5.5 million.
According to Javice, her firm closed its round in early March, before the recent market carnage. Bearing in mind that there is always lag between when a funding round is closed and when it is announced, the new Frank round is on the fresher side of things. Most rounds are a bit more like Shippo’s recent investment (closed in December, announced in April) than Podium’s recent deal, which it started raising in mid-February of this year.
Timing aside, what Frank is doing is interesting, so let’s talk about its business, how it approached 2019 and how it’s faring in today’s changed market.
Everyone’s broke
To help keep student debt low, Frank is a bit akin to TurboTax for college money, as TechCrunch wrote when covering its Series A, helping students get through a thicket of forms and aid to collect as much aid as possible while avoiding borrowing.
American higher education is too expensive, and applying for financial help is irksome and byzantine. I can safely report that sans quoting an expert, as I had to go through it as a student and only finished paying my student loans last July.
Frank wants to help make college more affordable, with the company noting in a call with TechCrunch that there’s been a good number of companies working to help students service debt in a less expensive way after they’ve hired the money; it wants to help students avoid taking on so much red ink in the first place.
According to Javice, lots of students fail to finish signing up for federal aid programs, and some students wind up dropping out of programs before finishing them, leaving them saddled with debt but no degree. That’s a hell of a trap to wind up in, as student loans are the barnacles of the financial world — incredibly hard to get rid of.
According to Javice, Frank was a little early to rethinking its own growth/profit trade-off than the rest of the startup world, which woke up when WeWork filed to go public and was quickly booed off Wall Street. In mid-2019, Frank slowed growth to get closer to the margins it wanted. (Thinking out loud, this is probably how the startup managed to survive so long off its December 2017 Series A.)
Indeed, according to Frank’s CEO, it was in a comfortable cash position before this round, which she described as more a vote of confidence than a round of necessity.
Which brings us to today, and the new, COVID-19 world. In an email to TechCrunch, Javice said that “like everyone else,” her company is “adjusting to the new realities.” She added that college and university attendance “has typically been countercyclical” and that her company is “seeing a large demand for higher education and specifically financial aid.”
If the new economy winds up creating a little tailwind for Frank, it won’t be the only startup to accrue help; Slack and Zoom and other remote work-friendly companies have also seen their fortunes turn for the better in recent weeks. And now with $5 million more on hand, it can certainly meet new demand.
Update: An earlier version of this article listed Chegg as the round’s lead investor; it did receive a board seat in the transaction but Frank does not consider it a lead investor. The post has been amended.
Powered by WPeMatico
With $8 million to consolidate Amazon’s top marketplace sellers, Perch makes its first deals
After raising $8 million in November to roll up top Amazon marketplace companies, the new Boston-based startup Perch has begun putting that money to work in its first few deals.
The brainchild of Chris Bell, formerly Wayfair’s head of logistics and a Bain & Co. principal, Perch is well-positioned to serve as unifier of a bevy of disparate products in one nest.
The company’s recent acquisitions include brands selling a sand anchor for beach umbrellas (Beachr), a waterproof apron for cooking, a hip sciatica brace (Bodymate) and other similar products that wouldn’t be out of place in a late-night infomercial or on the Home Shopping Network.
“We believe that the future of product R&D is entrepreneurs that are closest to the problems,” says Bell in an interview. “We look for products that are top three in their niche… [Their founders] want some liquidity and we can bring that onto our platform and add price optimization, ad-spend optimization and cross-geography marketing.”
In a way, Perch is tapping into a similar urge to give America’s huge population of tinkerers and inventors better access to market and a chance to monetize their ideas à la Quirky, the failed attempt by GE to turn gadget ideas into new product lines for GE.
By contrast, Perch waits for the businesses to gain traction, then offers to buy the products from their owners and give them up to two years of participation in any upside that the product generates at certain milestones that Perch sets for the participating entrepreneurs.
“Three years ago I would not have started this business,” says Bell. “Amazon has made this a much more defensible place.”
The Amazon marketplace remains somewhat of the Wild West, where intellectual property rights are often ignored and successful products are copied at lightning speed by vendors with access to the same commoditized supply chains. It’s really marketing muscle and an ability to get better margins through scale that creates winners, it seems, and Perch is using its technical know-how to get to the top.
Acquisitions can range from $750,000 to $2 million upfront with the upside on the back end still to come, according to Bell. Financing this operation is a $4.5 million equity round and $3.5 million in debt financing by some of the nation’s leading venture firms. Perch won’t buy any company that’s doing less than $250,000 in revenue.
Spark Capital led the deal for Perch, with general partner Alex Finkelstein taking a seat on the company’s board of directors. Tectonic Ventures also participated. Finkelstein, who led Spark’s investment in Wayfair, was introduced to Bell through Wayfair’s chief operating officer. He immediately saw the potential in Perch’s pitch.
“If you look at it from a macro standpoint. Amazon is growing very quickly and the third-party marketplace is growing very quickly. Within the next year we’re going to have a large portfolio and it’ll do well in any environment,” Finkelstein said.
Amazon’s third-party sellers are a $200 billion market and the largest single vendor is a $500 million seller, Bell noted, and that is an opportunity that a well-capitalized company can exploit.
“We’re going to be managing hundreds of micro-brands and the only way to do that is through a technology platform,” Bell said. “They’re generally niche products that are not big enough that Amazon Basics would come into that category. We’re competing in smaller categories, but even some of these niche categories are tens of millions to hundreds of millions in revenue.”
While Perch has seen some impacts from the economic shutdown caused by the government response to the COVID-19 epidemic, the company expects the shift in consumer behavior to be the wind beneath its wings, rather than against its branches.
“Medium-term it’s pushing more people to buy online,” says Bell. And Perch isn’t slowing its pace of acquisitions. “We made two acquisitions in March and we’re likely going to close another two in the next two weeks.”
Powered by WPeMatico
Microsoft launches Edge Zones for Azure
Microsoft today announced the launch of Azure Edge Zones, which will allow Azure users to bring their applications to the company’s edge locations. The focus here is on enabling real-time low-latency 5G applications. The company is also launching a version of Edge Zones with carriers (starting with AT&T) in preview, which connects these zones directly to 5G networks in the carrier’s data center. And to round it all out, Azure is also getting Private Edge Zones for those who are deploying private 5G/LTE networks in combination with Azure Stack Edge.
In addition to partnering with carriers like AT&T, as well as Rogers, SK Telecom, Telstra and Vodafone, Microsoft is also launching new standalone Azure Edge Zones in more than 10 cities over the next year, starting with LA, Miami and New York later this summer.
“For the last few decades, carriers and operators have pioneered how we connect with each other, laying the foundation for telephony and cellular,” the company notes in today’s announcement. “With cloud and 5G, there are new possibilities by combining cloud services, like compute and AI with high bandwidth and ultra-low latency. Microsoft is partnering with them bring 5G to life in immersive applications built by organization and developers.”
This may all sound a bit familiar, and that’s because only a few weeks ago, Google launched Anthos for Telecom and its Global Mobile Edge Cloud, which at first glance offers a similar promise of bringing applications close to that cloud’s edge locations for 5G and telco usage. Microsoft argues that its offering is more comprehensive in terms of its partner ecosystem and geographic availability. But it’s clear that 5G is a trend all of the large cloud providers are trying to tap into. Microsoft’s own acquisition of 5G cloud specialist Affirmed Networks is yet another example of how it is looking to position itself in this market.
As far as the details of the various Edge Zone versions go, the focus of Edge Zones is mostly on IoT and AI workloads, while Microsoft notes that Edge Zones with Carriers is more about low-latency online gaming, remote meetings and events, as well as smart infrastructure. Private Edge Zones, which combine private carrier networks with Azure Stack Edge, is something only a small number of large enterprise companies would likely to look into, given the cost and complexity of rolling out a system like this.
Powered by WPeMatico
Private tech companies mobilize to address shortages for medical supplies, masks and sanitizer
Startups across the nation and around the world are looking for ways to relieve shortages of much-needed personal protective equipment and sanitizers used to halt the spread of COVID-19.
While some of the largest privately held technology companies, like SpaceX and Tesla, have shifted to manufacturing ventilators, smaller companies are also trying to pitch in and relieve scarcity locally.
Supplies have been difficult to come by in some of the areas hardest hit by the outbreak of the novel coronavirus, and the shortfalls have been made worse by a lack of coordination from the federal government. In some instances local governments have been bidding for supplies against each other and the federal government to acquire needed personal protective equipment.
On Sunday, New York’s Governor Mario Cuomo pleaded with local governments to not engage in a bidding war. In fact, Kentucky was outbid by the federal government for personal protective equipment.
“FEMA came out and bought it all out from under us,” Kentucky Governor Andy Beshear told a local newspaper. “It is a challenge that the federal government says, ‘States, you need to go and find your supply chain,’ and then the federal government ends up buying from that supply chain.”
Against this backdrop local startups and maker spaces are stepping up to do what they can to fill the gap.
Alcohol brands are turning their attention to making hand sanitizer to distribute in communities experiencing shortages. 3D-printing companies are working on new ways to manufacture personal protective equipment and swabs for COVID-19 testing. And one fast fashion retail startup is teaching its tailors and seamstresses how to make cloth masks for consumer protection.
AirCo, a New York-based startup that developed a process to use captured carbon dioxide to make liquor, shifted its efforts to making hand sanitizer for donations in communities in New York City.
Now, new alcohol brands Bev and Endless West are joining the manufacturing push.
Endless West announced this morning that it would shift production away from its distillery to begin making hand sanitizers. The World Health Organization approved their sanitizers, which the company will produce in its warehouse in San Francisco.
The two-ounce bottles will be donated to local restaurants and bars that remain open for delivery, so that employees can use them and distribute them to customers. Bulk quantities will be distributed to healthcare organizations and facilities that need them.
Endless West also put out a call for other companies to provide supplies to hospitals and health organizations in the San Francisco Bay Area.
“We felt it was imperative to do our part and dedicate what resources we have to assist with shortages in the healthcare and food & beverage industries who keep the engine running and provide such important functions in this time of immense need throughout the community,” said Alec Lee, CEO of Endless West, in a statement.
Los Angeles-based Bev is no different.
“As an alcoholic beverage company, Bev is very lucky in that we are licensed to purchase ethanol directly from our suppliers, who are doing their part by discounting the product to anyone licensed to purchase it,” said Bev chief executive, Alix Peabody. “Community underscores everything we do here at Bev, and as such, we will be producing hand sanitizer and distributing it free of charge to the homeless and elderly communities here in Venice, populations who largely have insufficient access to healthcare and essential goods like sanitizer.”
Hand sanitizer is one sorely needed item in short supply, but there are others — including face masks, surgical masks, face shields, swabs and ventilator equipment that other startups are now switching gears to produce.
(Photo by PAU BARRENA/AFP via Getty Images)
In Canada, INKSmith, a startup that was making design and tech tools accessible for kids, has now moved to making face shields and is hiring up to 100 new employees to meet demand.
“I think in the short term, we’re going to scale up to meet the needs of the province soon. After that, we’re going to meet the demands of Canada,” INKSmith CEO Jeremy Hedges told the Canadian news outlet Global News.
3D-printing companies like Massachusetts-based Markforged and Formlabs are both making personal protective equipment like face shields, as well as nasal swabs to use for COVID-19 testing.
Markforged is pushing ahead with a number of efforts to focus some of the benefits of 3D printing on the immediate problem of personal protective equipment for healthcare workers most exposed to COVID-19.
“We have about 20 people working on this pretty much as much as they can,” said Markforged chief executive, Gregory Mark. “We break it up into three different programs. The first stage is prototyping validation and getting first pass to doctors. The second is clinical trials and the third is production. We are in clinical trials with two. One is the nasal swab and two is the face shield.”
The ability to spin up manufacturing more quickly than traditional production lines using 3D printing means that both companies are in some ways better positioned to address a thousandfold increase in demand for supplies that no one anticipated.
“3D printing is the fastest way to make anything in the world up to a certain number of days, weeks, months or years,” says Mark. “As soon as we get the green light from hospitals, 10,000 printers around the world can be printing face shields and nose swabs.”
Formlabs, which already has a robust business supplying custom-printed surgical-grade healthcare products, is pushing to bring its swabs to market quickly.
“Not only can we help in the development of the swabs, but we can manufacture them ourselves,” says Formlabs chief product officer, David Lakatos.
Swabs for testing are in short supply in part because there are only a few manufacturers in the world who made them — and one of those primary manufacturers is in Italy, which means supplies and staff are in short supply. “There’s a shortage of them and nobody was expecting that we would need to test millions of people in short order,” says Lakatos.
Formlabs is also working on another piece of personal protective equipment — looking at converting snorkeling masks into respirators and face masks. “Our goal is to make one that is reusable,” says Lakatos. “A patient can use it as a respirator and you can put it in an autoclave and reuse it.”
In Brooklyn, Voodoo Manufacturing has repurposed its 5,000-square-foot facility to mass-produce personal protective equipment. The company has set up a website, CombatingCovid.com, where organizations in need of supplies can place orders. Voodoo aims to print at least 2,500 protective face shields weekly and can scale to larger production volumes based on demand, the company said.
STAMFORD, CT – MARCH 23: Nurse Hannah Sutherland, dressed in personal protective equipment (PPE) awaits new patients at a drive-thru coronavirus testing station at Cummings Park on March 23, 2020 in Stamford, Connecticut. Availability of protective clothing for medical workers has become a major issue as COVID-19 cases surge throughout the United States. The Stamford site is run by Murphy Medical Associates. (Photo by John Moore/Getty Images)
Finally, Resonance, the fast fashion startup launched by the founder of FirstMark Capital, Lawrence Lenihan, is using its factory in the Dominican Republic to make face masks for consumers on the island and beyond.
“To contribute to the Dominican health efforts, Resonance is acting to utilize their resources to manufacture safety masks for distribution to local hospitals, nursing homes, and other high-risk facilities as quickly as possible. They have provided user-friendly instructions and material and will pay their sewers who can to make these masks from the security of their homes,” a spokesperson for the company wrote in an email. “Resonance is currently working to share this downloadable platform and simple instructions to their website, so anyone in the world can contribute to their own local communities.”
All of these efforts — and countless others too numerous to mention — point to the ways small companies are hoping to do something to help their communities stay safe and healthy in the midst of this global outbreak.
But many of these extreme measures may not have been necessary had governments around the world actively coordinated their response and engaged in better preparation before the situation became so dire.
There are a litany of errors that governments made — and are still making — in their efforts to respond to the pandemic, even as the private sector steps in and steps up to address them.
Powered by WPeMatico
Scanwell aims to launch at-home 15-minute coronavirus test, but it still needs FDA approval
At-home diagnostics startup Scanwell, which produces smartphone-based testing for UTIs, is working on getting at-home testing for the novel coronavirus into the hands of U.S. residents. The technology, which was developed by Chinese diagnostic technology company INNOVITA and has already been approved by China’s equivalent of the FDA and used by “millions” in China, can be taken at home in 15 minutes with the guidance of a medical professional via telehealth, and produces results in just hours.
Scanwell’s test will require FDA clearance, but the company tells me that it’s in the process of securing approval through the FDA’s accelerated emergency certification program. The FDA guidance says that this approval process should take 6-8 weeks (though that “could be faster,” Scanwell says), and Scanwell is aiming to be ready to go with shipping these as soon as it receives that approval. While the U.S. drug regulatory agency previously had only included PCR tests in its protocols, it updated that guidance to include serological tests earlier this week. Scanwell further says they “don’t anticipate any issues with FDA approval.”
The test that Scanwell is aiming to launch uses what’s called a ‘serological’ technique, which looks for antibodies in a patient’s blood. These are only present if someone has been exposed to the SARS-CoV-2 virus, since as of right now researchers haven’t found any evidence that natural antibodies to this particular virus exist without exposure. By contrast, the types of tests that are currently in use in the U.S. are “PCR” tests, which use a molecular-based approach to determine if the virus is present genetically in a mucus sample.
The PCR type of test is technically more accurate than the serological variety, but the serological version is much easier to administer, and produces results more quickly. It’s also still very accurate on the whole, and is much cheaper to produce than the PCR version. Plus, it could help expand efforts beyond testing only the most severe cases with symptoms present, and do a much better job of illuminating the full extent of the presence of the virus, including among people with mild cases who have already recovered at home, and those who are asymptomatic but carrying the virus with the possibility of infecting others.
Also, while other, PCR-based at-home testing options already exist, like one from Everlywell that will start going out on Monday, require round-tripping test samples, adding time, complexity and cost and relying on testing materials like swabs that are in short supply globally.
Once the test is available, people deemed eligible via Scanwell’s screening process in their Scanwell Health app will be sent the test via next-day delivery. They’ll be guided by telehealth partner Lemonaid‘s licensed doctors and nurse practitioners, and they’ll then receive results and further guidance about those results via the app within a few hours. The whole testing process will cost $70, which Scanwell says just covers its costs (it’s also looking at ways to provide free service to those who need it), and will be deployed first in Washington, California and New York, as well as other areas depending on the severity of their coronavirus situation.
That the tests will take potentially 6-8 weeks to come to market seems like a long time, given the current state of the rapidly evolving COVID-19 situation and testing. But we’ll likely still be very much in need of testing options at that time, especially ones that can serve people who aren’t necessarily meeting the criteria for other available testing resources.
Powered by WPeMatico
Men’s at-home health startup Vault takes in $30 million from Tiger Capital
Vault, an at-home healthcare practice specializing in men’s medicine has announced the raise of $30 million in funding from Tiger Capital Group, Declaration Capital and Redesign Health to reach more potential patients and expand to more areas beyond New York, Florida, Tennessee and Texas, where it currently offers treatments.
Founder and CEO Jason Feldman, who formerly headed Amazon’s Prime Video Direct and Global Innovation teams before launching Vault last summer, told TechCrunch his startup aims to bring specialized medicine into men’s homes to give them “a better body, better sex and a better brain.”
He tells TechCrunch he started the company after noticing how many of his male friends seemed embarrassed about medical conditions or simply didn’t know they could do something about it.
Vault operates on the assumption men face certain barriers to going to the doctor for things like hormonal imbalance and erectile dysfunction. The startup tries to remove these barriers by making it easy to book at-home appointments and get a work-up with a nurse practitioner.
“I want to de-stigmatize men’s health.” Feldman told TechCrunch. “You tell a guy to go see the doctor about his heart health and he likely won’t but you tell him you’ll bring him a doctor to help his penis and it’s a different story.”
Like many new concierge medical services that have popped up in the last few years, Vault does not take insurance, instead signing patients up via membership for $133 to $300 per month, depending on the type of service you sign up for. Compare that to Forward, which caters to both men and women and offers unlimited in-office visits and testing for $149/month or Roman, a men’s “digital clinic,” which offers free online evaluations, $15 doctor’s visits and prescription medications for similar services to Vault like erectile dysfunction, hair loss and testosterone support — although Roman requires patients see a physical doctor of their choosing within the last three years before they’re able to get prescriptions via digital services.
But Feldman doesn’t think his startup is anything like what’s out there right now, claiming it as the first national men’s healthcare provider. Vault offers specialty packages like testosterone therapy or the “sex kit” for an increased sex drive or stronger erections, something that sometimes diminishes as men age.
So far, Feldman has signed up over 500 medical practitioners to come to various home locations and has hired a chief medical officer to ensure medical standards are being met. He now plans to use the new funding to open up operations in 42 cities across the U.S. and work on spreading the word to all men nationwide that Vault is here for them.
Powered by WPeMatico
This bathroom cleaning robot is trained in VR to clean up after you
You’ve no doubt heard about the three Ds of automation. Somatic’s robot handily qualifies for two. I’d say “dangerous” is probably a bit of a stretch here, but the robot is well-focused on replacing a job that’s generally regarded as both “dirty” and “dull.”
The startup, which is ostensibly based in the New York area (it’s a small, geographically dispersed team in search of a more permanent home) effectively came out of stealth onstage at TC Sessions: Robotics + AI at UC Berkeley. Its first product is a large, commercial restroom cleaning robot.
CEO Michael Levy compares the device to a “minifridge with a robot arm attached to the front.” Levy, who co-founded the company with CTO Eugene Zasoba, says he was inspired to develop a robot for bathroom cleaning after years spent working his way up at his grandfather’s restaurant.
“When I grew up, I did a bunch of jobs. He said, if you want to get to the register, you have start in the bathroom,” he explains. “The reason bathrooms are such a good application, because everything is bolted down to the floor. Things move in a predictable way. All commercial bathrooms built after 1994 are ADA compliant. What’s good for robotics is that lays a specific design.”
The static nature of most commercial restrooms means that robots only have to train on a space once. The team does the work remotely now, using a VR simulation of the bathroom to show the robot where to spray and wipe chemicals, vacuum and blow-dry. It’s an activity the team affectionately refers to as “the worst video game, ever.” Once all of that is in place, the robot uses a variety of sensors, including lidar, to navigate around.
The robot will clean a restroom, then go to recharge and refill chemicals as needed. It should get around eight hours of cleaning done in a day and can even open doors and ride the elevator to get around buildings, according to Levy.
Prime targets include airports, casinos, office spaces and other spots with large commercial restrooms. The robot will be leased out for around $1,000 a month, after a trial phase. Somatic already has a handful of customers, including a FAANG company, whose offices are already being cleaned by the robot.
The first model was created with help from $50,000 in bootstrapped funds, to which Somatic has added $300,000, including $150,000 from SOSV.
Powered by WPeMatico